Polymer make-up & dosing

Neat polymer per month + working-solution recipe.

Flow (التصرف)

Polymer doseaid 0.1–1.0 · primary 1–10mg/LWorking-solution strength0.05–0.5% typical% w/v

360

kg/month

neat ARTFLOC / CHIMIFLOC

Neat polymer: 12 kg/day
Working solution: 12 m³/day
Feed rate: 12000 L/day
Dilution water: 11.99 m³/day

Method

M = D × Q / 1000 ; V_sol = M / (%w/v × 10) ; 0.1% = 1 kg/m³

Reference: Metcalf & Eddy; supplier make-up practice.

Polymer type (charge/MW) and dose are jar-test decisions. Make up fresh, allow 30–60 min hydration, avoid over-concentrated stock (>0.5% dry becomes unpumpable).

Estimated use: about 360 kg/month of ChimiArt ARTFLOC / CHIMIFLOC polymer (dose 0.5 mg/L, flow 24000 m³/day).

Want to confirm this on your actual water? We can run a free jar test or send the grade's spec sheet.